32 inch scapyard magnet with 10 kw generator ( #408 )

Description

32 inch copper wiring scrapyard magnet
With 10 kw hydraulic generator
This is a used scrapyard magnet.  The lifting chain have no wear trace.
The connection wiring has be redone with new cable and plug
Fresh new paint.
The voltage controller is a EDP-C2 conception made in Canada
Edp-c2 technical data
Input supply : 24 vdc , 12 – 24 vdc or 36 vdc 6 amps peak 2 amps
run Output to field : 0 – 300 vdc up to 5 amps.
Output to magnet : 0 – 300 vdc
programmable 50 , 100 , 200 amps model all are upgradable
Overload and Short protection
Temperature : -40 C to 60 C inside box drop 15% power at 50 deg. C And still working until 60 deg C
Duty cycle : 100 % duty until 50 deg C inside box
Digital input : Programmable ,volt input +24 vdc 60 ma from S+
Sw- = Command input Twin with Boost / Unload Twin with out Boost puls
In = Command input - Nul ,Drop NC , Drop NO
Digital output : +24 vdc 200 ma max Programmable OUT = Hydraulic valve with off delay load=trigger Message on display Time out Load / Unload Twin = Load / Unload and Message on display VO= Hydraulic valve with off delay load=trigger
Reel time display - Armature volt ,armature amps,field volt ,pwm . - Input / output - Isolation with code 65
Avantage
- Installation help . connection reversing message . input test with display pixel like a test lamp . automatic ajustement
- Multipl langage display
- Alphanumeric Display for trouble message and test lamp
- 20 Trouble memory with number memorised like max. amps. , max. volt for technician help
- Isolation test at each start up with alarm message and readout
- Amps protection programmable 15 to max amps at all unit ex. 31,32,33,amps
- Power off discharge circuit for security
- Arc proof when magnet is disconnected in load cycle
- Variation rpm compensation in less than 1 sec
- Volt curve up and down is good to increase life of equipement. - No electric arc to protect the magnet isolation
- Watch dog CPU supervised can reset CPU if eratic working witout drop magnet load.
- Maximum load time programmable 1 to 10 minutes 0 = nul or infini At end of timer the magnet drop verry slowly until load command.
- Capacity of 0 to 200 amps in one small size box - Upgradable up to 200 amps and more. - Easy retro fit
The magnet has been check with megger : 500 Mohm at 1250V
200 Mohm at 2500V
IIB
inc.
/ INNOVATION INDUSTRIELLE BOIVIN / GROUPE ALFRED BOIVIN
Ref. 408
Terms and Conditions:
We are also specializing in sales of new, refurbished and used industrial equipment.  We are not a representative of any manufacturer listed; all names, logos, descriptions and other related information are trademarks of their respected companies or manufacturers.  All items listed are identified as either new, seller refurbished or used.  When possible and in most cases, items are tested to ensure reliable quality.
We will combine shipments to reduce costs for customers purchasing multiple items.  After customers have completed their multiple purchases they should request an invoice.  We will package and weigh the entire purchase and provide an invoice, including shipping and handling.  We ship using LTL Freight, UPS and Canada Post and we provide en-route package tracking.  For all shipment outside Canada an IRS or Tax number is needed for the customs paperwork. We have competitive rates for shipping freight. All items are palletized before they leave the warehouse.  Please see pictures for further description.
Thank You for Your Business.